ACCUTEX AP-6040 EDM CUTTER

Accutex Ap-6040 EDM (Electrical Discharge Machining) EDM Cutter is an EDM cutting machine that makes it cut 1000 kg of materials. At the request of our customers, we can make changes in control unit or adjust machines according to different specifications. You can contact us for additional information or a quote.

ACCUTEX AP-6040 | TECHNICAL DETAILS

The technical details of the Accutex GE-43F Wire EDM machine are described below. Please contact us for more information.

Max. Workpiece Size L*W*H (mm) : 1050*775*345
Max. Workpiece Weight (kg) : 1000
X/Y Stroke (mm) : 600*400
U/V Stroke (mm) : 160*160
Z Stroke (mm) : 350
Max. Cutting taper (mm) : ±32°/H100 mm
Max. Wire Spool Weight (kg) : 16
Footprint W*D*H (mm) : 2312*2795*2371
Water System Capacity (L) : 1000
Machine Weight (kg) : 4000

CUTTING INSTANCE

The following are some of the products that the Ap series can skillfully cut. You can contact us to cut this examples or more.

PITCH ACCURACY

With 12-hole cutting, it is produced from the SKD11 material with tolerances ranging from ± 3µm on 400*300*30 mm sizes. 0.25 mm wire is used, and the process is finished with 3 cuts.

CONTINUOUS CORNER

The AP series allows for equal tolerance in corners. The radius is 0.18 mm, and the short path is 0.207 mm. Hole thickness is 50mm, and mold thickness is 30 mm. The product is obtained from SKD 11 material with 0.25 mm wire in 3 steps.

ACCURACY FINISHING (OPTIONAL MST 2 POWER MODULE)

Machinery provides a surface on Ra 0.06 µm. The product is used from 30 mm thick tungsten carbide with 0.2 mm wire is processed in 9 steps.

PCD APPLICATION (OPTIONAL PCD / GRAPHITE POWER)

The polycrystalline peel layer has a tolerance of less than 5µm with less grinding time and optional PCD power. 0.2 mm wire is used to process 1 mm thick materials.

SUPER FINE SPINNERET (OPTIONAL CABLE 0.05-0.1 MM)

The width of the slot is 0.2 mm, and the radius is 0.06 mm. It can cut 5 mm thick tungsten carbide with 0.07 mm wire.

HELICAL GEAR CUTTING (OPTIONAL ROTARY TABLE)

Vertical type is supplied for rotary table application. Thread diameter is 380 mm and the material used is steel. It can cut 25 mm steel with 0.25 mm wire in 2 steps.

35 ° WIDE TAPER CUTTING

Our machines can be used to produce plastic injection molds. 35 ° single side taper made from 40 mm thick SKD 11 material with 0.25 mm wire in 3 steps. Thin surface accuracy is less than 0.7µm.

HIGH PRECISION RATIO AND COMPLEX PROFILE ASSEMBLY PARTS

AP series can be used in stamp mold applications. The maximum tolerance is less than 5µm at 80mm. Products are made of 80 mm thick SKD 11 material with 0.2 mm wire in 5 steps.

LEAD IN / LEAD OUT

Products can open a 2µm wire mark when no cutting path changes. Our machinery is made products from 40 mm thick tungsten carbide material with 0.25 mm wire in 3 steps.

ACCUTEX AP-6040 EDM CUTTER | PHOTOS

All pictures and photos shown are for illustration purpose only. Actual products may vary due to product enhancements.

ACCUTEX AP SERIES CUTTERS | RELATED PRODUCTS

The AP series is available in different sizes and types according to the needs of our customers. Below is a list of the AP series EDM cutting machines. For detailed information, you can browse the product page.

For more details about our Accutex AP 6040A+ EDM, please contact AccuteXTurkey.

You can get more information about us and our products.

TOP