- About Us
- AU SERIES EDM
- AL SERIES EDM
- GE SERIES EDM
- AP SERIES EDM
- EZ SERIES EDM
- GA SERIES EDM
In the AU EDM series, a control system is developed by Accutex. Accutex's R & D team has developed a controller that allows around the world to easily adapt by customers. Accutex controllers are constantly renewed using the latest technologies. It includes corner control function, automatic power recovery function, precision cut-low tolerance function, and multi-block jump function.
Operating system of machinery is Windows CE. Windows CE is a dedicated operating system written by Microsoft for portable devices and is capable of high responsiveness.
During multi-hole cutting process, when screw cutting is a failure or die holes cannot be cut for any reason, controller saves failure workpiece, and continues cutting other workpieces without delay.
Remote control software is a software set up for the Windows system and allows you to connect to AU series EDM machinery via an internet connection for remote monitoring. In this way, the state of the remote machine can be controlled, adjusted, simulated, and loaded any files.
|Controller System :||Windows CE|
|Control Device :||64-bit Industiral PC|
|Memory Device :||1 GB CF Card|
|Screen Display Device :||15” Color TFT Touch Screen|
|Data Input :||Keyboard, RS-232, USB, Ethernet, FTP|
|Number of control Axes :||5 Axes / 6 Axes (Option on W Axes)|
|Simultaneous Axes :||4 Axes / 5 Axes (Option on W Axes)|
|Min. Command Unit :||0.0001 mm|
|Max. Command Range :||±9999.9999 mm|
|Command Type :||mm /inch|
|Cutting Data Memory :||99999 sets|
|Ignition Power Supply :||32 sets, between 53 V - 138 V|
|Max. Cutting Speed :||250 mm²/min|
|On Time :||24 Steps|
|Off Time :||43 Steps|
|Discharge Mode :||Rough Cut / Slim Cut / Fine Cut|
Wire EDM makes to metal cutting with wire electrodes and reducing heat with dielectric liquid.
Workpieces and electrode are immersed in dielectric water, and cutting process is carried out with aid of sparks.
|Wire Diameter Applied :||Between 0.15 – 0.33 mm (0.10 Opt.)|
|Simultaneous Axis :||AYUV 4 Axis /Opt. On W Axis|
|Transmission :||5 Axis AC ServoTransmission|
|Max. Cutting Taper :||±21° (Wide-Angle Nozzle / H=100,H=80 for AU-3i/300i|
|Water Resistance :||Auto 5-200 Ω-cm|
|Water Temperature :||Auto Control ±1°C|