ACCUTEX GA SERIES EDM (ELECTRICAL DISCHARGE MACHINE)

Accutex GA series EDM cutters have direct power design on X / Y axes. While linear guide rails remain in straight line, the working table is supported by casting bases. The GA series is suitable for fine die cutting in small and medium molds. Machine structure is designed with finite element analysis (FEA).

Thanks to industry 4.0 intelligent production integration system, it can work in full automation with other machines. The Accutex controller, which determines parameters according to different wire diameters, corner angles, arc radii, and material thickness, can meet the required corner accuracy, especially in small path and continuous corner cutting operations.

GA SERIES | FEATURES

  • During cutting, the AC servo tensioner performs tension check and renews when the cable breaks.
  • Wire end needle-shaping applies reverse tension and annealing heat treatment to strengthen the wire.
  • The machine has an automatic waste-wire extraction device that uses an air blowing system to quickly and easily remove waste wire in collection cabinet.

GA SERIES | SPECIFICATIONS

WINDOWS CE CONTROLLER

We developed the Accutex Controller to easily adapt to any changes. The system is based on the Windows CE operating system. It provides accuracy motion control with fast servo response. It is protected by an anti-virus program.

I-MONITORING (* OPTIONAL)

You can monitor the status of the AccuteX machine at any time via your smartphone and tablet.

LINEAR MOTOR

The new-generation shaft-type linear motor is developed by AccuteX. Provides closed-loop control with 0.2 μm resolution linear scale. Fast servo response can increase cutting efficiency by up to 10%. The AccuteX linear motor has excellent low power consumption. Fast servo response prevents wire breakage, and increases cutting speed also requires fewer maintenance costs.

ULTRA RESOLUTION SIGNAL PROCESSOR

The machine has an ultra-resolution linear scale interpolation card to achieve a smoother speed and stabilize position control. Standard resolution is 0.2 μm.

ROTARY TABLE (*OPTIONAL)

We have developed a built-in type motor spindle for Sinker EDM operations. This can provide up to 720000 pulses of ultra resolution at each running speed.

LEAD-IN / LEAD-OUT

The system that improves mold quality makes only 2µm wire mark after making 3 cuts in 40 mm thickness.

CCD MEASUREMENT SYSTEM (*OPTIONAL)

The machine can be equipped with a 3 µm precision CCD camera capable of optical on-line measurement.

GA SERIES | RELATED PRODUCTS

Below, there are different varieties of GA series. You can visit our product pages for detailed information.

For more details about our GA Series EDM, please contact AccuteXTurkey.

You can get more information about us and our products.

TOP