GE SERIES EDM WIRE CUTTERS

The wire erosion method is cutting of a metal workpiece with an electrode wire via electric charge. Continuous washing with a dielectric fluid is provided to remove resulting chips. Power is not used for cutting, electrical energy is used. It is a highly preferred method for cutting small parts.

Accutex GE series EDM wire cutting machines have a high usage area in the production of molds, production of medical products with flat surfaces, aviation industry, and electronics industry.

EDM WIRE | TYPES

Electrode wires used to cut a metal workpiece can be produced from different materials. Diameters of the electrode wires usually range from 0.05 to 0.4 mm. Below are the wire types according to their materials:

  • Brass Wire
  • Coated wire
  • Molybdenum Wire
  • Steel Core Wire
  • Diffusion Annealed Wire
  • Tungsten Wire

GE SERIES WIRE CUTTER | ADVANTAGES

  • Surface roughness is low and ideal for cutting complex workpieces.
  • Allows easy cutting of hard materials.
  • The removal rate is low, and the removed chips are removed with the aid of dielectric fluid without sticking to the workpiece.
  • The material required to cut is wire and the only cost required is wire cost.

GENERAL TECHNICAL | DETAILS

Below are general technical information about GE series EDM cutting machines. You can reach us for more details or visit our product pages.

Wire Diameter Applied : Between 0.15-0.33 mm
Transmission : 5 axes AC servo trenamission
Maximum Cutting Taper : ±15° (H=80mm)
Water Resistance : AUTO 5-200 kΩ-cm
Water Temperature : AUTO Control ±1°C
Accutex GE 43F

GE SERIES EDM WIRE CUTTER | RELATED PRODUCTS

Below is a range of GE series EDM wire cutting machines. You can visit our product pages to get detailed information about these machines.

For more details about our GE Series EDM Wire Cutters, please contact AccuteXTurkey.

You can get more information about us and our products.

TOP