GE SERIES SINKER EDM CUTTERS

The Sinker EDM process is a process of cutting an electrode and a metal workpiece with sparks under dielectric water. It is preferred in sectors requiring superior surface quality and precision measurements. Our GE series sinker EDM machines provide high performance, low cost, and precise metering.

WORKING PRINCIPLE OF SINKER EDM MACHINERY

A power source produces an electrical charge between an electrode and metal piece in dielectric fluid, and thanks to structure of the dielectric liquid, hundreds of thousands of sparks are generated per second. These sparks ensure that workpiece is cut to desired dimensions. Blind holes and complex shapes, which cannot be performed with EDM wire, can be cut more easily.

DIELECTRIC LIQUID

Dielectric liquid is necessary for erosion. In addition, it has the functions of removing the chip from the work environment and decreasing of environment heat. Dielectric liquids should not be allowed to overheat. The overheated liquid causes the formation of gas, thus reducing the speed of chip removal.

ELECTRODE TUBES

In the Sinker EDM process, electrode tubes produced from various materials are used. Below are the electrode tubes used in the sinker EDM process:

  • Graphite electrode
  • Copper electrode
  • Brass electrode

GENERAL TECHNICAL | DETAILS

Below is the general technical details of GE series EDM machines. For more detailed information, you can visit our product pages or request information from us.

Wire Diameter Applied : Between 0.15-0.33 mm
Transmission : 5 axes AC servo trenamission
Maximum Cutting Taper : ±15° (H=80mm)
Water Resistance : AUTO 5-200 kΩ-cm
Water Temperature : AUTO Control ±1°C
Accutex GE 53S

GE SERIES SINKER EDM CUTTERS | RELATED PRODUCTS

Below are the types of GE series sinker EDM cutting machines. You can visit our product page for detailed information.

For more details about our GE Series Sinker EDM Cutters, please contact AccuteXTurkey.

You can get more information about us and our products.

TOP